PRIORITY SIGNS- SANTANDER BANK CHANGE-OVER

                                       PROJECT COMPLETED- DEC. 2013


 We were contracted by Priority Signs in May of 2013, to do Surveys for 12-locations

 in and around the Williamsport area of all the Signage for existing Sovereign Banks.

 This was to be done in preparation for the Change-over to Santander that was to

 occur in October. We managed and changed out 4-6-signs per location, including

 Pole Signs, Wall Panels, Wall Plaques & Letters, Directionals, I.D.Signs, ATM-Island

 Faces & ATM-Surround Faces as well as many temporary Banners and Signs. All in

 time for the Oct. deadline. Including the biggest Sign change at the Downtown

 Williamsport location. Removing the 6-ft high Old Channel Letters off of the Wall

 and Installing the New 6-ft high x 36-ft long Sign Cabinet onto the Wall approx.

 80-ft in the air.

                     The specs for the Lrg. Sign at Downtown Williamsport are:

 * Cabinet Size: 72''-high x 36'-0''-long

 * Aluminum Construction approx. 1500-lbs

 * Fluorescent Lamp Lit

 * Installed approx. 80-ft onto the side of a Dryvit wall downtown building

 * Aluminum Tube stand-offs & All-thread through approx. 30-mount points

                                       PROJECT COMPLETED- NOV. 2014


 We were contracted to Manufacture and Install Reverse LED-Illuminated Channel

 Letters for the New Entrance Canopy at the Williamsport High School for the School

 District. The Letters were to be Backlit with Red LED lights, creating a Halo-Effect

 around and behind the Letters at night. The Letters were Welded Aluminum with

 Clear Plexiglass covers on the backs that the LED-Modules were mounted onto, and

 then Stud mounted onto the Fascia. Special provisions had to be made for mounting

 since there was no access behind the Letters nor inside the Canopy.

                                            The specs for the Sign are:

 * Letter Sizes: 24''-high x 232''-long

 * Aluminum Fronts and Returns, Painted White

 * Clear Plexiglass Letter backs

 * Red LED-Modules with Remote mounted Power Supplies

 * Stud Mounted onto Canopy Aluminum Composite Panel Fascia

THE WILLIAMSPORT- RIVER VALLEY REGIONAL YMCA


NOW FULLY BONDED !                 RECENT PROJECTS

                                                                                              877-339-0357

                                                                                                 570-322-7576

ADDITIONAL CONTENT COMING LATER

Copyright 2015. Stetts Signs, LLC. All Rights Reserved.

_______________________________________

214 Fleming St., South Williamsport, PA 17702

WILLIAMSPORT AREA HIGH SCHOOL- MILLIONAIRES

PENNSYVANIA AMERICAN WATER- SCRANTON, PA

                                       PROJECT COMPLETED- NOV. 2014


 We were contracted to build a Sign for Pennsylvania American Water in Scranton,

 PA, through a 3rd company. The Sign was to be constructed as a Double Sided

 double Curved Faces with Radius Ends and Stud Mounted Letters. The company

 asked us if we could come up with a more Cost Effective Design than the normal

 type of Fabrication. What we came up with utilized 1/8''-thick B-bond Aluminum

 Composite Sheets Bowed over a Welded Alum. Angle Frame. This proved to be

 more cost effective, but challenging also.

                                            The specs for the Sign are:

 * Size: 75''-ovh x 9'-0''-wide, made in 2-8''-h Sections + 2-3''-h Reveals + a 53''-h

    Middle Section. All Slid over & attached to 2- Steel Poles.

 * Sign Comp Extrusion was used to make the Radius Ends.

 * Reveal Ends- Were Modified & Welded Sign Comp Extrusion pieces.

 * Steel Poles were 1/8''-Wall with 1/4''-Steel Plates Welded to bottom.

                                       PROJECT COMPLETED- DEC. 2014


 We were contracted to build 2- large White Backer Panel Signs with the YMCA Logo

 as an Illuminated Channel Letter on each. One was mounted High onto the North

 Side and one was mounted near the Entrance on the East Side of their New

 Williamsport Building near the newly expanded Susquehanna Health System

 (Williamsport Hospital) building on Walnut Street.

                                      The specs for each of the Signs are:

 * 10'x10'-White Backer Pan Panels made in 2-Vertical Sections, Non-lit.

 * 78''-high Aluminum Channel Letter "Y", Channel Letter word "the" & Channel Box

    "YMCA", all Illuminated with White LED's & Translucent Vinyl Overlays.

 * Each Sign required 4-Power Supplies & a couple hundred LED-Modules on 1-Circut

 * Mounting was done with a combination of Lrg.Toggle Bolts & Concrete Anchors.

C.H. WALTZ SONS, INC., COGAN STATION, PA

                                       PROJECT COMPLETED- JAN. 2014


 We were contracted by C.H. Waltz Sons, Inc. of Cogan Station, PA in 2013-2014.

 A very well known Dealer in the area for Farm Equipment. To build and Install a

 large Double Pole Pylon Sign with a large 7-ft x 12-ft Cabinet on top as their new

 sign and to display their Dealer Brand signs as well. We had to have Engineering

 Drawings made & approved, and also had to obtain a Variance to install the sign.

 The Foundation and entire Sign Structure was put into the ground in January with

 a special concrete mixture at 9-ft depth. The Sign is 25-ft to the Top above ground.


                                             The specs for the Sign are:


 * Cabinet Sizes: Top = 84''-h x 12'-0''-w, Dealer Signs are 3-ft x 6-ft each, all D/F

 * Poles- 8''-sq. tubes x 3/8''-Wall x 27-ft long

 * All Signs Fluorescent Lamp Lit

 * Foundation: 2-  24''-Dia. Auger Holes, 9'-0''-deep ea. approx.

 * Poles Direct Embedded with Welded rods to promote concrete Grip w/Poles


THE LARGEST PROJECTS WE'VE DONE

RECENT PROJECTS ONLY

LLC